How to measure the overall cabinet size

How to measure the overall cabinet size

When renovating a kitchen, measuring the overall cabinet dimensions is a crucial step. Only accurate dimensions can ensure that the cabinets perfectly fit the kitchen space and avoid gaps or inability to install during later installation. This article will detail how to measure the dimensions of an entire cabinet and provide structured data for reference.

1. Preparation before measurement

Before measuring cabinet dimensions, you need to make the following preparations:

1.Clear kitchen space: Make sure the measurement area is free of debris for accurate measurement.

2.Preparation tools: A tape measure, level, pen and paper are essential tools. If possible, you can use a laser rangefinder.

3.Record key points: Such as the location of water pipes, gas meters, sockets, etc. to avoid conflicts during cabinet installation.

2. Measurement steps

Here are the specific steps for measuring overall cabinet dimensions:

1.Measure kitchen length and width: Record the longest and widest distance from one wall to the other.

2.Measure height: Height from floor to ceiling, ensuring cabinet height matches the space.

3.Measure door and window positions: Record the width, height and opening direction of doors and windows to avoid obstruction by cabinets.

4.Measure pipe and socket locations: Mark the locations of water pipes, gas pipes, sockets, etc. so that they can be avoided when designing cabinets.

3. Common cabinet size reference

The following is a standard size reference table for overall cabinets for your reference when designing:

4. Precautions

1.multiple measurements: It is recommended to measure more than 3 times and take the average to reduce the error.

2.Consider baseboards and toplines: When measuring, you need to reserve space for the skirting line and top line.

3.Appliance size matching: If appliances such as refrigerators and ovens need to be embedded in the cabinet, the size of the appliances must be measured in advance.

4.leave a gap: It is recommended to leave a 1-2cm gap between the cabinet and the wall to avoid thermal expansion and contraction deformation.

5. Summary

Measuring the overall cabinet size is a key step in kitchen renovation. Accurate measurements can ensure smooth installation and beautiful and practical cabinets. With the steps and reference data in this article, you can easily complete your measurement work. If you still have questions about the dimensions, it is recommended to consult a professional designer or installer for a more accurate solution.

I hope this article helps you navigate your cabinet sizing and create an ideal kitchen space!