How to apply self-adhesive wallpaper by yourself
In the past 10 days, home DIY has become one of the hot topics, especially the method of pasting self-adhesive wallpaper has received widespread attention. Many people have shared their wallpaper-application experiences on social media. Here is a detailed guide compiled from hot spots across the internet.
1. Background of hot topics
According to recent data, the search volume for self-adhesive wallpaper has increased by 30% month-on-month. The following are statistics of related hot topics in the past 10 days:
| Ranking | hot topics | amount of discussion |
|---|---|---|
| 1 | Self-adhesive wallpaper purchasing tips | 125,000 |
| 2 | Steps to apply wallpaper alone | 98,000 |
| 3 | Frequently asked questions about wallpapering | 73,000 |
| 4 | Recommended self-adhesive wallpaper brands | 61,000 |
2. Steps of applying self-adhesive wallpaper
The following is an efficient wallpapering method compiled from the entire Internet, suitable for one person to operate:
| steps | Operating Instructions | Things to note |
|---|---|---|
| 1. Preparation | Clean the wall to ensure there is no dust or oil stains; measure the wall size and cut the wallpaper | Uneven walls need to be polished with sandpaper |
| 2. Align starting point | Starting from the corner of the wall or the edge of the door or window, tear off the wallpaper backing film 5cm and align the position | Use a level to ensure verticality |
| 3. Paste step by step | While peeling off the backing film, use a scraper to remove air bubbles, working from top to bottom. | The scraper force should be even |
| 4. Treat seams | Adjacent wallpapers overlap by 2cm, cut along the center line with a utility knife and flatten | Keep the blade sharp |
| 5. Trimming and finishing | Press the edges with a roller and cut off any excess | Avoid tearing the wallpaper with excessive force |
3. Solutions to common problems
Based on the popularity of discussions among netizens, the following high-frequency questions have been sorted out:
| question | Solution | Precautions |
|---|---|---|
| bubble generation | Prick it with a needle and flatten it, or peel off the part and re-paste it. | Keep the scraper at a 45° angle to the wall |
| Seams are obvious | Fill with glue of the same color, or cover the decorative strips | Choose patterns with obvious textures |
| Wallpaper peeling off | Use special wallpaper glue to partially reinforce | Make sure the wall is dry before pasting |
4. Tools and materials list
It is recommended to prepare the following tools when operating alone:
| Tools | Quantity | alternative |
|---|---|---|
| tape measure | 1 handful | Mobile phone ranging APP |
| utility knife | 2 handfuls | Scissors (not recommended) |
| scraper | 1 | Credit card (temporary use) |
| spirit level | 1 | Mobile phone level function |
5. Things to note
1.Environmental requirements: The construction temperature is recommended to be between 10-30℃ and avoid direct sunlight.
2.time planning: It takes about 3-4 hours to build a 10㎡ wall. It is recommended to construct in sections.
3.Safety tips: Ensure stability when using ladders. It is recommended to have someone assist you when working at heights.
6. Netizens’ actual test suggestions
According to the order posting data on popular social platforms, the three techniques with the highest success rate are:
1. First practice on a small area (inside the bathroom/wardrobe)
2. Prepare spare wallpaper (calculated usage +10%)
3. Listening to music while constructing can reduce the error rate (the efficiency measured by netizens increased by 20%)
With the above structured guide, even one person can easily apply self-adhesive wallpaper. Remember to take photos before and after construction for comparison, and share them on social platforms to get more practical suggestions!
check the details
check the details
en
